K100 Wolverine Series Square Entry Level Filter Kit All comments are manually moderated before display2 Comments Michael Cane on 18/06/2018 at 8:49 am Please could you clarify : – with 77mm lens (eg Fuji 16-55) the adapter ring screws on to the lens and then the holder attaches to the 86mm side? ie whatever lens you use you need to end up with 86mm to attach the holder. – presumably the GND filter will not fit in the case so what protection is provided for this? – is a protective wallet provided for the ND filter? otherwise presumably you end up with a nice filter case but with only one filter in it! – same for polariser or can you store this in the front pocket on the case Sorry for all the questions but hope they are easy to answer Many thanks Michael Cane Reply [email protected] on 18/06/2018 at 1:42 pm Hi Michael, to answer your questions: 1. The holder locks on to the outer edge of the adapter ring which is 86mm diameter. You wouldn’t though be able to use other 86mm rings as the ring is in fact in two pieces with one of the parts having a toothed edge. This allows the polarising filter to rotate whilst the filter holder remains locked in place. 2. Each of the ND and ND grad filters is supplied with a strong, padded protective wallet with magnetic clasp. Don’t forget though that the filters are scratch resistant. I tend to carry three in a simple filter wrap (cloth) if I don’t want to carry a case. 3. The polarising filter comes in a plastic filter case or you can store it in the front pocket of the Kase filter case if you have one. Hope this helps Regards Robin ReplySubmit a Comment Cancel replyYour email address will not be published. Required fields are marked *CommentName * Email * Website This site uses Akismet to reduce spam. Learn how your comment data is processed.